What is a Reinforcement Bar?
What is a Reinforcement Bar?
Do I Need to Put Rebar in Concrete?
Everyone knows concrete is a solid material. But while it shows high-compression capabilities, it suffers from a lack of tensile strength. Therefore, rebar is applied to compensate for this flaw, increasing tensile strength so structures can bear heavier loads and withstand movement.
Nearyz Resources are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.
Because without the appropriate tension, our concrete structures would crack under the external elements they face, whether strong winds blowing tower blocks or the heavy weight of vehicles crossing a bridge.
So, ensuring your concrete construction contains rebar will maintain the integrity of your structure and avoid cracking or deteriorating in time. Concrete and steel also share a similar coefficient thermal expansion rate, meaning both materials respond to temperature equally. This similarity causes less stress to structures with both materials in sync to expand and contract as the temperature changes.
When building a structure, you should check that you reinforce the concrete with the appropriate regulations and meet compliance standards.
Here is a list of the appropriate standards you should consider for your rebar project:
Design for reinforced concrete BS EN -1.
Steel specifications for reinforced concrete BS .
Steel wire for reinforced concrete BS .
Steel fabric for reinforced concrete BS .
Your reinforced concrete project should be designed by an engineer and meet Technical Requirements R5. If youre looking to reinforce concrete when suspending ground floors, garages and low-rise buildings, we recommend you satisfy BS -1.
As a rule of thumb, always read the official regulations for concrete construction before investing any further into your project. These standards are vital to guarantee construction safety and include any mechanical, chemical, and physical properties of reinforcement bar products.
Reinforcement Bar Types and Sizes in the UK
In the UK, we assort steel rebar into specific sizes and types. We do this for property developers to deliver high-quality, consistent, and reliable results when building alongside meeting all relevant health and safety regulations.
Here are some popular types of reinforcement bars with specific sizes, weights, and measurements:
T8 Steel Bar
T8 steel bars are a versatile reinforcement product used across commercial and domestic projects at an H-grade-high tensile strength. T stands for tensile strength, and 8 signifies the millimetre width with various lengths available. The size and weights of T8 steel bars include the following measurements:
Mass (Kg per metre) 0.393
Dimensions 10mm
Meters per tonne
For more information, please visit Reinforcing Steel Manufacturers.
T10 Steel Bar
With an extra 2mm width, T10 steel bars are used commonly across construction and domestic DIY projects for various smaller construction sizes and complexities. T10 steel bar is also the rebar used for A393 mesh with larger diameters of T12 and T16 used in larger projects. The size and weight of T10 steel bars include the following measurements:
Mass (Kg per metre) 0.616
Dimensions 12mm
Meters per tonne
T12 Steel Bar
Compared to T8 and T10, T12 steel bars are used in medium-to-larger-scale projects when higher tensile strength is required. Specifications for T12 steel bar size and weights include the following:
Mass (Kg per metre) 0.888
Dimensions 14mm
Meters per tonne
T16 Steel Bar
T16 steel bars get used commonly across the construction industry for commercial property projects. As steel rebar with a greater diameter, T16 is often seen in prefabricated components that require advanced reinforcing, like pile caps, ground beams and columns. Size and weight specifications for T16 steel bars are as follows:
Mass (Kg per metre) 1.579
Dimensions 19mm
Meters per tonne 663
T20 Steel Bar
Finally, T20 steel bars provide a large 2cm diameter to ensure the structural integrity of large-scale construction projects. The size and weight measurements for T20 steel bars include:
Mass (Kg per metre) 2.466
Dimensions 23mm
Meters per tonne 405
Find Your Ideal Reinforcing Bar to Support Your Next Construction Project
At Hickman & Love, we pride ourselves on providing high-quality steel reinforcement products. All our rebar products are H-grade high-tensile steel reinforcement consistent with BS :.
Alongside our range in T steel bars, we also stock a range of stainless reinforcement products and steel boots, L-shaped bars and fence post reinforcement.
For further information or to order please call +44 (0)121-557- or we look forward to hearing from you. Or like us on Facebook to keep up to date with projects and news.
21
0
0
All Comments (0)
If you are interested in sending in a Guest Blogger Submission,welcome to write for us!
Comments