Selecting The Right Wire Mesh Screens For Your Home

Selecting The Right Wire Mesh Screens For Your Home

Are you interested in learning more about wall strengthen fiberglass mesh manufacturers? Contact us today to secure an expert consultation!

Imagine these scenarios:

1. It’s hot and you don’t have air conditioning at home or work.
2. You’ve accidentally overcooked dinner. It’s still smoking.
3. You’re trying to relax, and the sounds of nature would be soothing.

What’s the first thing you’ll likely do? Probably open a window. However, insects, birds, leaves, and other airborne nuisances might make you regret that decision.

Window screens are designed to keep the outside elements out while allowing airflow. They act as a barrier between your indoor space and the outside world.

Nonetheless, wire mesh screens do more than keep bugs out; they significantly enhance a property’s aesthetic appeal. Screens make windows look complete.

Choosing a window screen isn’t just about appearance. Two essential factors will determine your screen’s performance: screen mesh sizes and materials.

What to Consider When Shopping for Wire Mesh Screens

Choosing the right screen for your specific need involves considering:

1. Screen Mesh Sizes and Strand Size: What do you want to keep out? How big is it? And how wide an area do you need the screen to cover?
2. Material: Which material best suits the screen’s purpose, environment, and desired aesthetic?

Unsure Which Window Screen is Right for Your Project?

Compare our available window screen mesh inventory for the right fit.

Screen Wire Size: What Are Mesh Size and Strand Size?

Simply put, mesh size measures the holes in the screen. The hole size determines what gets through and adds to the screen’s rigidity.

Strand size (or gauge) measures the wire diameter that makes up the screen. Thicker wire enhances screen strength but may affect appearance and visibility.

A screen with a smaller mesh size and larger strand size increases integrity and can span longer distances without sagging.

How to Measure Screen Mesh Sizes

Measuring mesh size involves counting the number of holes per square inch of the screen. To find this number:

1. Cut a 1-inch by 1-inch hole in a piece of paper and tape it to the screen, aligning the cutout edges with the vertical and horizontal wires.
2. Count the holes horizontally across the cutout. Write this number down.
3. Count the holes vertically from top to bottom of the cutout. Write this down too.
4. Your mesh size is the number of horizontal holes by the number of vertical holes, often 18x16, 18x14, or 20x20.

Window wire mesh size matters primarily to keep bugs out while allowing air to flow freely. In areas with tiny insects, a mesh size of 18x14 or even 18x16 might not suffice, whereas a 20x20 mesh screen might do the trick, reducing airflow slightly.

What Materials Are Used to Make Screens?

Screens meet varied demands, so you have multiple material choices. The material type significantly impacts screen performance. Some are designed for durability, while others focus on function: air circulation.

Popular residential and commercial screen materials include:

• Black PetScreen®: A vinyl-coated polyester pet screen resisting damage from pets while offering insect protection.
• Brite-Kote™ Bright Aluminum Screen: This aluminum mesh screen provides good air ventilation, aesthetics, and durability.
• Charcoal fiberglass screen: Offers good outward visibility and doesn’t rust, corrode, or stain. For more cheap fiberglass mesh for plasteringinformation, please contact us. We will provide professional answers.
• Charcoal aluminum screen: A metal screen mesh that reduces glare, offers good outward visibility, and is weather-resistant.
• SeeVue insect screen: A stainless steel wire mesh screen with a black finish, offering both durability and aesthetics.
• UltraVue insect screen: A fiberglass screen mesh with a vinyl coating, known for excellent visibility and lasting protection.

Screens are also available in copper, brass, and other materials to meet diverse needs.

Screen and Frame Pricing:

Screen pricing largely depends on mesh and strand size along with the material. At New Angle Beveling, we provide the following prices for window screens:

Window Screen Performance = Screen Mesh Sizes + Wire Gauge + Material

Carefully selecting mesh screens is a natural part of any window, helping to maximize functionality. The right combination of screen mesh size, wire gauge, and material lets you enjoy an open window fully.

Looking for a glass partner for your next commercial project? Check out our services and capabilities.

(Editor's note: This blog was originally published in May 2019 and was recently updated).

How Do You Fix a Hole in the Wall?

Do you have nail holes to fill or perhaps an accidental doorknob puncture? Wall spackling can fix most small holes, but larger holes need at least fiberglass mesh for reinforcement. In some cases, drywall replacement is necessary. From minor dings to significant damage, here’s how to repair a hole in the wall.

How Do You Fix a Hole in the Wall?

The method depends on the hole size. Wall dings and small holes can be repaired with spackle and a putty knife, but larger ones require a mesh patch or even replacing a drywall section. Small drywall repairs could cost as little as $5, whereas larger repairs might cost $25 to $75.

Always wear eye protection and a dust mask or ventilator when sanding drywall mud.

Regardless of the hole size, here are the basics of drywall repairs.

How To Fix Drywall Dents and Dings

Lightweight spackle easily fixes dings and dents in drywall.

Tools & Supplies:

• Wall Spackling
• 2-Inch Putty Knife
• Sand Paper

3 Simple Steps To Repair Drywall Dings and Dents:

1. Lightly sand the dent to remove rough spots and wipe clean with a damp cloth.
2. Apply a lightweight spackle with a putty knife and let it dry overnight.
3. Sand the drywall surface until it's smooth.

How To Fill a Small Hole in the Wall

For screw or nail holes up to an inch and a half, use spackle or joint compound with a putty knife.

Tools & Supplies:

• Joint Compound or Wall Spackle
• 2-Inch Putty Knife
• Sand Paper

3 Easy Steps To Repair Small Drywall Holes:

1. Sand the hole gently to smooth out rough edges, then wipe with a damp cloth.
2. Apply a thin layer of compound using the putty knife and let it dry overnight.
3. Sand the drywall patch until smooth.

How To Patch a Medium-Sized Hole

Reinforce holes between one and a half and five inches with fiberglass mesh tape. Mesh tape ensures the patch sets properly. Self-adhesive mesh patch kits and galvanized-metal patches are also available. Cover the patch with joint compound or spackling.

Tools & Supplies:

• Shop Vac
• Drywall Patch or Mesh Tape
• Joint Compound or Wall Spackle
• 4-Inch Putty Knife
• Sand Paper

4 Steps To Fix Wall Holes Up to Five Inches:

1. Use a shop vac to clean out the hole and remove loose debris. Sand the edges gently and wipe with a damp cloth.
2. For self-sticking patches, cut the patch to size and stick it down. If using drywall mesh tape, apply a thin layer of joint compound around the hole, cover it with mesh strips, and let dry. Apply tape in the same direction, slightly overlapping each piece.
3. Spread a thin coat of compound over the patch without pressing too hard. If you used mesh tape, apply another tape layer in a crisscross pattern for added strength. Feather the compound out for a smooth surface and let it dry.
4. Gently sand the patch to blend it with the wall. If it isn’t smooth, apply another spackle layer. Let it dry and sand again.

How To Fix a Large Hole in the Wall

Fixing holes larger than five inches involves cutting a new drywall piece and securing it to wall studs. This prevents future cracks or patch collapse.

Tools & Supplies:

• Utility Knife or Drywall Saw
• Shop Vac
• Tape Measure or Ruler
• Piece of Drywall
• Drywall Screws
• Electric Drill
• Drywall Mud or Joint Compound
• Drywall Joint Tape
• 6-Inch Drywall Knife
• Sand Paper

8 Steps To Fix Holes in the Wall Larger Than Five Inches:

1. Use a utility knife or drywall saw to square up the hole and expose at least one wall stud.
2. Clean the hole with a shop vac and sand the edges. Wipe with a damp cloth.
3. Measure the hole and cut a drywall piece slightly smaller than the opening. Ensure a maximum quarter-inch gap on all sides.
4. Screw the new piece into the exposed wall studs using drywall screws spaced 12 to 16 inches apart for larger repairs.
5. Use a drywall knife to apply mud around the edges, then press drywall tape firmly into joints to hide seams. Let dry overnight.
6. Sand rough spots and wipe with a damp cloth. Apply another mud coat. If seams are visible, add another paper tape layer. Allow to dry overnight.
7. Sand away rough spots. Apply a final mud layer, feathering the patch with the wall. Wait for it to dry.
8. Sand the patch until the wall is smooth. Continue sanding and applying mud as necessary for a smooth finish.

How To Paint After Repairing Drywall Holes

Post-repair, paint the patch to match the wall. Use a paintbrush for small dings, nail holes, and holes under two inches. For larger holes, a roller blends patches more seamlessly.

Wait at least 48 hours for the patch to dry before painting to avoid cracks or peels. If you have matching paint, you're set; otherwise, you may need to paint the entire wall.

Tools & Supplies:

• Paint
• Paintbrush or Roller
• Paint Tray
• Painter’s Tape
• Surface Texture (Optional)

6 Steps to Painting After Repairing Holes in a Wall:

1. Clean the entire wall with a damp cloth, then dry with a microfiber cloth.
2. Cover door jams, molding, and outlets with painter’s tape.
3. Paint the patched area with three coats, letting each dry for an hour.
4. Feather paint into the rest of the wall and let dry overnight.
5. If using surface texture, apply as directed.
6. Inspect in the morning for uniform color. Paint the entire wall if necessary.

Need Help Fixing a Hole in Your Wall?

Concerned about DIY wall repairs? Our experts across the country can assist. Find your local Best Pick® handyman now! Benefit from the best research, recommendations, and the Best Pick Guarantee® – up to $2500 back if you’re not fully satisfied!

Contact us to discuss your needs with a c-glass fiberglass roving supplier. Our experienced sales team can help you find the best options.