4 Advice to Choose a bs2482 scaffold boards

We always have a stock of scaffold boards in both new and used. They’re all for sale and we use the reclaimed ones in our workshop to make shelves and tables. We like scaffold boards and they’re popular for many uses eg raised beds and furniture making as they’re a good size.

With competitive price and timely delivery, XINFUSHI sincerely hope to be your supplier and partner.

We get large quantities of used scaffold boards from scaffolders when they no longer meet health and safety regulations and so can’t to be used on building sites. We cut off damaged and notched parts of the boards and cut them to standard sizes as below.

As they are used boards they will all be slightly different, some may have surface damage, cracks, a slight warp or twist, something spilt on them, or the scaffolders name stamped on the side – it all adds to the rustic character of the boards. Each board will be slightly different. Bearing this in mind we encourage our customers to pick their own boards where these factors are important. We can also select boards for you, it helps if you let us know what the boards are for so we can select boards suitable for your purpose

We also stock brand new boards which are graded to BS and so can be used as scaffolding.

Yes but worth keeping in mind that they are not seasoned wood (ie not kiln dried) they will have a relatively high mixture content. We store them in the dry but they are still likely to retain moisture from their outdoor life and when they get into a centrally heated home they may shrink and twist or warp as they dry. We suggest where possible to leave the boards inside a heated room for a couple of weeks to dry them and acclimatise them to where they will be. They’re still quite likely to shrink and ‘move’ over time, but that’s part of the charm and character of the boards.

Maybe! Often they will have a metal end band on one end only as they have been cut down from a longer length. 3.9m used boards usually have bands on both ends, some of the shorter used lengths may have as well.

We sell metal bands separately.

Our new boards in lengths of 2,4, 3,0 and 3.9m have metal bands on both ends.

Should you need to the bands are quite straightforward to remove with a screwdriver, pliers and some brute force.

People often use them as raised beds as they’re an ideal size for this. When making raised beds we recommend using a post in each corner eg 45x45mm and approx 200mm long to screw the boards to. The posts do not need to go into the ground as the weight of boards and soil will hold the structure in place. Taller beds can be made by using more layers of scaffold boards We can supply the posts too.

A preservative can be applied to extend the life of the boards, worth checking if it’s ok to use a particular preservative if you’re planning to grow fruit and veg in them.

Scaffold boards are platforms that allow builders to access elevated areas and move freely between levels while working at heights. It’s also where scaffold protection like toe boards are fitted along the edges to prevent tools or materials from falling off the platform. 

Given their crucial role, it’s essential for construction personnel or anyone learning about scaffolding to be familiar with these boards. This guide will explore what scaffold boards are and their specifications. 

For more bs scaffold boardsinformation, please contact us. We will provide professional answers.

Scaffold Boards Setup on Scaffolding 

Scaffold boards, also known as walk boards, are placed horizontally on each level, side by side, to form a flat surface that covers the scaffolding’s width. These boards are supported by a metal framework, resting on the horizontal scaffold tubes or transoms — these are the bearers that span across the ledgers at right angles to the building. This setup lets workers move safely across the scaffold and reach different areas of the site. 

Scaffold boards are used in the installation of every category of scaffolding in construction. 

What Are Scaffold Boards Made Of? 

Boards manufactured to Grade A standards are recommended according to British Standard specifications. Manufacturers guarantee this requirement is met by adding marking on the boards’ end bands. 

End bands are affixed with metal strips using three clout nails at the end and two on each edge of the boards. They extend around the edges of 38mm boards by at least 150mm and 63mm boards by at least 100mm. 

Besides being used as a tag system, these bands protect the boards from splitting. They’re used to mark the boards with the BS code, manufacturer year, supplier ID, support span, and whether the board was graded visually or by a machine (e.g., machine-stress-graded timber). 

Scaffold Boards Dimension 

When talking about safety measures for scaffold boards, part of compliance involves ensuring the boards meet the recommended width, length, and thickness as specified by British Standards. 

Width 

Scaffold boards must comply with British Standard (BS) , which sets 225mm (9 inches) as the standard width. This, however, can vary based on workload requirements. For lighter loads, narrower boards around 200mm (8 inches) are ideal. Wider boards, up to 300mm (12 inches), provide more stability and support for heavier loads. 

The width also depends on the scaffolding design, which determines how many boards are placed side by side. A 3-board scaffold fits 3 standard-width boards side by side, a 4-board fits 4, and for heavier loads, a 5-board allows 5 wider boards. 

Note: Extra boards may also be added to fill gaps between the scaffold and the building, with their width depending on the gap size. 

Length 

Scaffold boards come in various lengths and are measured in feet. Common lengths include 3ft (0.9m), 4ft (1.2m), 5ft (1.5m), 6ft (1.8m), 8ft (2.4m), 10ft (3m), and 13ft (3.9m). The length you choose depends on the span between the scaffolding frames and the type of work being done. 

Note: Each length can have the same width, depending on the manufacturer. SP Gilray offers industry-standard sizes of scaffold boards. 

Thickness 

Standard thicknesses include 38mm, 45mm, and 63mm, with 38mm being the most commonly used. The board’s thickness affects its support span. Thicker boards, like the 45mm and 63mm, handle heavier loads and larger spans best. 

Meeting all these requirements alone does not guarantee safety; proper measures must also be in place. A thorough inspection is important, ensuring the surface is smooth and free from visible cracks, splits, warping, moisture and decay. Anti-slip protection should also be used, when necessary, especially in wet or oily conditions. 

If you are looking for more details, kindly visit 20 ft lvl beam price.