Why do we use flexible hoses?

WHAT ARE THE FLEX (FLEXIBLE) CORRUGATED STAINLESS STEEL HOSES AND HOSE FITTINGS USED FOR?

You can find more information on our web, so please take a look.

Flex (flexible) stainless hoses have been serving us in miscellaneous areas such as combis and cookers in our houses, meters at the entrances of our flats, fountains, armatures and decorative indoor gas installations, which is getting popular day by day. In other words, they keep their distance but in reality, are very close to our lives and safety, for decades, thanks to its ease of installation and use, and long-lifetime against the corrosion.

Apart from these, flex hose (pipe) are used for general water installations, solar systems, boilers, and fan coil systems, Thanks to its flexible and corrosion resistant structure, they are preferred for all of the systems where difficult & time consuming adjustments vibration and corrosion are desired to be eliminated, and easy & fast installation is needed. KAS company is a wholesaler manufacturer of stainless flexible steel hoses produced in Turkey.

The main fluids flowing through them are natural gas and hot/cold water.

Stainless flex hoses (ss flex hose) are manufactured from special stainless sheet strips having the content stated in TSE and EN ISO European standards. Several material types are referred to in the relevant standards. So in order to explain the issue simpler, we will mention only the common types, known as 304/304L, 316/316L

The stainless hoses have a melting point of approximately - degrees Celsius (&#;C). Therefore, they are very resistant against a possible fire.

The outer coatings (tube) have no fire-preventive specification. The coating is expected to protect the hose against cleaning chemicals and not to pose any breathing hazard by releasing the hazardous chemicals it contains.

CE Gas Flex Group: https://kas.com.tr/en/prod-category/en--gas-flex-group/

They must be subjected to all type of tests such as mechanical, chemical, thermal, etc. stated in the standard(s) depending on the intended use of finished products.

If the area of usage is not limited to a specific standard, the customer can request to put the product to test in conformity with TS EN flex hose general standard or any kind of special test.

The manufacturers become entitled to receive certificates from relevant institutions for the products which pass these tests successfully.
We strongly recommend the users to pay attention to these certifications with priority.

Note: In this document, we will be addressing the products as &#;hose&#; and &#;flexible hose assembly&#;. &#;Hose&#; is used for the ones without any welded fittings.

Stainless Steel Flexible Flex Hose Companies Turkey

Turkish Flexible Flex Hose, Turkey Stainless Steel Flexible Flex Hose Manufacturers, Suppliers

Stainless Steel Flexible Pipe Made in Turkey from Turkish Suppliers, Exporters and Manufacturers in Turkey

MANUFACTURING STAGES OF FLEX HOSE

Flex Hose begins its manufacturing journey as &#;stainless sheet strip&#; which is manufactured very precisely regarding its chemical content, cutting & surface quality, smoothness, thickness, etc.

Then, it is welded on a production line uninterruptedly with any method such as TIG, Laser, Plasma, etc. and it turns into a pipe. Afterwards, it becomes a flexible hose on the same line, with its corrugations on it, via hydraulic or mechanical forming. Right after this, it is subjected to a leakage test.

If it is going to be dispatched immediately after coiling and packing, then the &#;hose&#; becomes a product, e.g. solar flex hoses. On the other hand, if it is going to be delivered as a &#; flexible hose assembly&#; it must pass through at least one of the stations mentioned below. During these processes, the semi-finished products are subjected to one or several leakage tests. In other words, each product will have been tested at least 2 times in total without any exceptions.

1- Welding the end pieces (fittings) such as nipple, coupling/sleeve (usage with union nut
&#; All kinds of flexible hose assemblies

2- Stainless steel wire braiding
&#; cooker flex

3- Annealing (For easy bending and for 100 % extensibility)
&#; Indoor gas flex
&#; Extensible flex

4- Tube (insulation) coating with transparent and opaque PVC, polyolefin/polyethylene, pvc+polyethylene foam materials
&#; Flex for Cooker Connection (Transparent PVC)
&#; Indoor Gas Flex (Opaque PVC)
&#; Flex for Combi Connection (Polyethylene/Polyolefin)
&#; Meter Connection Flex (Polyethylene/Polyolefin)
&#; Extensible Flex (Polyethylene/Polyolefin))
&#; Solar Flex (PVC+Polyethylene foam)

5- Closing
&#; Extensible Flex

TECHNICAL SPECIFICATIONS and VARIETIES OF FLEX (FLEXIBLE) HOSE

A. MATERIAL QUALITY &#; CHEMICAL CONTENT

Under the previous title, we stated that the word of &#;quality&#; does not have the same meaning with &#;qualified&#; as we use in daily life and it is rather related to the elements contained in the metal itself. In other words, it refers to material types which come into existence when the elements such as chromium, nickel, molybdenum, etc. in the raw material are available in varying ratios.

The flexible hoses are manufactured from stainless steel sheet strip. In order to call a metal &#;stainless steel&#;, it should contain at least 10.5% of chromium in it (by weight)

The stainless steels (Wikipedia: stainless steel ) are the steels which are very resistant to formation of red colored rust (ferrous oxide) that we know in general terms. However, many types of stainless steels will still corrode when they are exposed to chemically aggressive situations. In other words, it is very important for the user to select the material in conformity with the intended use or to give the necessary information to manufacturer before ordering and thus, to steer the manufacturer in the right way.

As we stated in the introduction part, we can classify the qualities of sheets used for hose production under 2 main common groups. 304 / 304L and 316 / 316L.

** 304 / 304L &#; contain 8-12% nickel and 17.5-2% chromium. They can be used in the fluids such as water, gas, etc. except for aggressive environments such as saline water, excessively humid environment, etc.

** 316 / 316 L &#; contain 10-13% nickel, 16.5-18.5% chromium and 2-2.5% molybdenum. They can be even used under aggressive conditions such as saline water, etc. and they show a very high resistant performance against corrosion thanks to molybdenum it contains.

* * The letter of &#;L&#; at the end refers to low carbon ratio. The low carbon ratio prevents the corrosions (sensitization corrosion) which may occur in the molecular structure at the time of both welding and annealing processes.

While the carbon ratio is maximum 0.08% at normal qualities, this ratio is maximum 0.03% for low carbon ratios.

B. WAVE (CORRUGATION) SECTION TYPE

There are 2 main section types such as annular and helical. The corrugations are perpendicular to hose axis in the annular type which makes it easier to install and safer to use.
Moreover, the annular type hoses don&#;t give a rise to torsional forces in case of high pressure or pressure shocks and thus, they are more resistant compared to helical hoses.
Today, the annular hoses are preferred because of these superior technical properties.

C. WAVE (CORRUGATION) TYPE

Goto Xinshun to know more.

Featured content:
Product introduction, advantages and disadvantages ...

Stainless Flexible Hoses (ss flex hose) can be categorized into 3 main pitch types in conformity with their intended uses: Wide, Standard and Closed (Compressed). The number of corrugations on the hose increases so the waves become frequent as we go from wide to compressed pitch.
The compressive strengths of node types and its impacts on flexibility are given in the table below.

TYPEPRESSURE RATINGFLEXIBILITYCLOSED (COMPRESSED)++ + + +STANDARD+ ++ + +WIDE+ + ++ +

As shown in the Table, the flexibility increases but the compressive strength decreases as the number of nodes increases.

(Compressed Pitch, Standard Pitch, Wide Pitch)

 

D. HOSE FITTINGS

The end pieces of flexible hose fittings such as nipple, coupling/sleeve (usage with union nut), nut, etc. can be manufactured from materials such as stainless steel, carbon steel, chrome coated, brass, chrome coated brass, etc. in conformity with TS EN standards as desired or stipulated by the standard. In the nonstandard application, the right material selection by user/manufacturer is important such as in the hose.

E. COATING (CASING) TYPES &#; INTENDED USES AND BENEFITS

The coating can be made on the stainless hose in conformity with intended uses stated in the relevant standards or special demands.
In general, this coating is known as &#;tube&#; on the market.
The stainless flex hoses have a melting point of approximately - degree (C). Therefore, they are very resistant against a possible fire. The outer coatings (tube) have no fire-retardant specification. The casing is expected to protect the hose against cleaning chemicals and not to give a rise to a breathing hazard by releasing the hazardous chemicals that it contains.

Tube Casing (Coating) Types

1- Transparent PVC: It is used for Cooker Connection and Water Flex. The main aim is to prevent the damage of hoses and end pieces by aggressive chemicals which may be used for house cleaning. Apart from this, it fulfills the functions such as easy cleaning, decorative appearance and sound and vibration reducing from water flexes and it makes extra contribution to flexibility.

2- Opaque PVC: It is used for indoor gas flexes. It protects the hose against aggressive chemicals and external impacts. It ensures easy cleaning and decorative appearance.

3- Polyethylene /Polyolefin: It has a soft and resistant structure. Thanks to its soft structure, it is used for all products where extra vacuumed coating is desired (Combi Flex, Extensible Flexes, Meter Flexes, etc.)

4- PVC + Polyurethane Foam: This type of coating which is produced with composite PVC on polyurethane foam, is preferred for solar system hoses thanks to its high resistance against though natural conditions such as high heat, rain, snow, mud, etc. and it has a very well heat (thermal) insulation capability. It also has integrated sensor cable.

5- Polyurethane foam: It can be used in water and fancoil flexes with the aim of water insulation.

INTENDED USES AND DISTINCTIVE SPECIFICATIONS OF FLEXIBLE HOSE FITTINGS

Under this title, we will give the standards and distinctive specifications of pipe fittings within the scope of TS EN standards in the tables below.

TS EN &#;FLEX FOR COOKER CONNECTION

DESCRIPTION OF SPECIFICATIONREMARKTYPE OF PIPE NODECLOSED (COMPRESSED)STAINLESS WIRE MESHAVAILABLEANNEALINGN/AEND PIECESSTAINLESSOUTER COATINGTRANSPARENT PVC TUBE

TS EN &#; FLEXES FOR COMBI CONNECTIONS

DESCRIPTION OF SPECIFICATIONREMARKTYPE OF PIPE NODESTANDARDSTAINLESS WIRE MESHN/AANNEALINGN/AEND PIECESCHROMIUM IRONOUTER COATINGPOLYETHYLENE/POLYOLEFIN TUBE (EXTRA VACUUMED) OR BARE

TS EN &#; FLEXES FOR METER CONNECTION

DESCRIPTION OF SPECIFICATIONREMARKTYPE OF PIPE NODESTANDARDSTAINLESS WIRE MESHN/AANNEALINGN/AEND PIECESCHROMIUM IRONOUTER COATINGPOLYETHYLENE/POLYOLEFIN TUBE (EXTRA VACUUMED) OR BARE

TS EN &#;INDOOR GAS FLEXES

DESCRIPTION OF SPECIFICATIONREMARKTYPE OF PIPE NODEOPENSTAINLESS WIRE MESHN/AANNEALINGAVAILABLEEND PIECESBRASSOUTER COATINGOPAQUE PVC TUBE

UNI &#; EXTENSIBLE FLEXES ( FOR NONSTANDARD OPTIONAL USE FOLLOWING &#;/&#;)

DESCRIPTION OF SPECIFICATIONREMARKTYPE OF PIPE NODEEXTRA CLOSED (EXTRA COMPRESSED)STAINLESS WIRE MESHN/AANNEALINGAVAILABLEEND PIECESSTAINLESS/CHROMIUM IRONOUTER COATINGPOLYETHYLENE/POLYOLEFIN TUBE (EXTRA VACUUMED) OR BARE

BOILER FLEXES

DESCRIPTION OF SPECIFICATIONREMARKTYPE OF PIPE NODEUPON DEMANDSTAINLESS WIRE MESHN/AANNEALINGN/AEND PIECESUPON DEMANDOUTER COATINGPOLYETHYLENE/POLYOLEFIN TUBE (EXTRA VACUUMED) OR BARE

SOLAR FLEXES

DESCRIPTION OF SPECIFICATIONREMARKTYPE OF PIPE NODEOPEN/UPON DEMANDSTAINLESS WIRE MESHN/AANNEALINGN/AEND PIECESN/AOUTER COATINGCABLE-LAID/CORDLESS/SPECIAL INSULATED

FANCOIL / WATER FLEXES

DESCRIPTION OF SPECIFICATIONREMARKTYPE OF PIPE NODEOPEN/STANDARD/UPON DEMANDSTAINLESS WIRE MESHN/AANNEALINGN/AEND PIECESSTAINLESS / CHROMIUM IRON / BRASSOUTER COATINGUPON DEMAND

In conclusion, flexible stainless steel hoses and hose accessories are important components used in various fields. They are widely used in our homes in boilers, stoves, meters, faucets, fixtures, and decorative gas installations. They are also utilized in general plumbing, solar energy installations, boilers, fan coil systems, and other systems.

Flexible hoses provide ease of installation and use, as well as corrosion resistance. They can convey fluids such as natural gas and hot/cold water. Stainless steel hoses are manufactured in compliance with the standards of TSE and EN ISO and undergo specific tests. Manufacturers receive certification for products that pass these tests, and customers are advised to pay attention to these certifications.

The production of hoses starts with stainless steel strip sheets and goes through stages such as cutting, welding, hydraulic or mechanical shaping. This results in obtaining a flexible hose or hose assembly. Various types of flexible hoses can be produced with different fittings, coatings, and coverings.

The commonly used material qualities are 304/304L and 316/316L stainless steel types. These materials are resistant to corrosion and can be selected for use in different environments. The low carbon content prevents corrosion during welding and annealing processes.

Flexible stainless steel hoses are a preferred option in many applications due to their durability, flexibility, and resistance to corrosion. They serve as an important component, effectively conveying fluids while ensuring safety.

By: David Marlowe 

Because of the numerous advantages seamless steel tubing possesses over other tubing&#;apart from the added cost&#;seamless steel tubing is widely used in hydraulic systems. Seamless steel tubing is easier to bend than steel pipe, so it does not require the number of fittings and can be reused. High-volume applications are probably one of the only limited areas to the use of tubing.

Tubing size is measured on the outside diameter of the tube. All sizes are available in a variety of wall thicknesses. The application and use of tubing, (material, diameter and maximum pressure) will determine the wall thickness of the tubing used. Sizes range from 1&#;8 to 2 in. in fractional sizes.
Considering the application, internal pressures, weight, environmental conditions and whether you are going to use flared or flareless tubing are all considerations you must know to help you in material selection. Good quality tubing must be selected to ensure a good seal.

Tubing comes in a variety of materials, including:

• Seamless carbon steel, which is the most commonly used. It has a tensile strength to 47,000 psi.
• Stainless steel is used when external conditions require noncorrosive materials. It also has a tensile strength to 47,000 psi.
• Plastic can be used in low pressure applications.
• When selecting a material for your specific application, don&#;t focus only on the price tag. The manufacturer&#;s information is the most reliable and should be used when selecting the material based on allowable stress and working pressures.

Fittings
Tubing does not use threaded fittings. The fitting attachment is accomplished by either a component or another tube. The attachment is made by the following:

• Flared fittings are used primarily in low to medium pressure applications.
• SAE standard J533B covers specifications for both single and double flared (37° and 45° flare) tubing. Double flared tubing is used with thin walled tubing.
• SAE 37° angle is the standard angle used for hydraulic system tubing.
• SAE 45° angle is used with soft copper tubing for applications such as refrigeration, fuel lines, etc.
• The maximum wall thickness recommended by SAE standard should be checked prior to flaring a tube.
• Flareless Fittings, also commonly known as compression fittings, are used primarily in medium- to high-pressure applications.
• As system pressures increase, you require a thicker wall thickness. Higher pressures also affect the ability to use a flared type fitting.
  • Pressure capacity can be calculated using the following formula:
    • Pressure (P) = 2 x S x T / D,

Where
P &#; pipe internal pressure in psi
T &#; wall thickness
D &#; O.D. tube
S &#; stress on tube material in psi
Flareless type tubing fittings are available in
two common styles.

• Ferrule or Sleeve Type: The ferrule is used to seal against the tapered seat of the fitting and the tube. When tightening the nut a sealing pressure is felt on sealing surfaces causing the tube to deform
• O-ring type: Sealing is obtained by the installation of an internally mounted O-ring. The O-ring type uses a split ferrule to clamp the tube.
  It is important to remember to never mix from different manufacturers and always refer to the manufacturers specifications (torque recommendations) prior to installation.
• Welding fittings are used primarily in high pressure, vibration and fixed applications.
  Butt and sockets welds are both used to connect the fitting to the tube, so material type wall thickness and welding skills must be considered when using a welding fitting.

Flexible hose

• As stated previously, pipe and tubing are rigid fluid conductors and therefore not suitable when there is movement of one end of the conductor while the opposite end is fixed.

• The benefits of flexible hose over rigid pipe and tubing is that flexible hose is simple to route, withstands vibration and thermal expansion or contraction.
• Flexible hose consists of the following:
  • Inner tube
  • Reinforcement
  • Outer protective cover

The inner tube is made of either oil resistant synthetic rubber or thermoplastic material. Reinforcement amount and type is determined by the hose&#;s pressure rating. As the requirement of reinforcement increases from a single fiber/wire braid to multiple fiber/wire braids, the hose loses its flexibility. Outer protective cover is manufactured to be oil and weather resistant. Primarily, the outer protective cover is made of a synthetic rubber or thermoplastic material. The Society of Automotive Engineers (SAE) has set standards for hydraulic hose specifications. Most manufactures of hydraulic hose meets or exceeds SAEJ513 requirements.

Final note: Because the hose meets standards it is extremely important to carefully match the end fittings to the hose selected

For more Industrial Flexible Hoseinformation, please contact us. We will provide professional answers.