Metal Lath & Accessories
Jun. 10, 2024
Metal Lath & Accessories
NW. 77th Court. Miami,
Florida
USA &#; : 305-556-
Fax: 305-556-
Made from expanded steel, the lath generally is applied flat across the stud plane and
attached with staples, nails, or wafer head lath screws. The openings in the lath enable
plaster to key around the metal to assure a secure bond and a flat, smooth surface
plane upon completion of the plaster application. Metal lath comes in a variety of
configurations, including self-furring (dimpled and continuous groove for use over solid
substrates ASTM C) and paper-backed, to meet specific job requirements and
plaster/stucco preferences. ClarkDietrich products meet or exceed the requirements
of ASTM C847.
A Galvanized Expanded Steel Plaster/Stucco Base
A superior multi-purpose expanded steel base widely used for interior and exterior
plaster and stucco reinforcement. The flat surface is easily cut and formed for use with
flat or contoured surfaces. It is an excellent base for stone, spray on structural
fireproofing, ornamental work, and under ceramic tile. Expanded metal lath is formed
from sheet steel that has been slit and expanded to form thousands of plaster &#;keys&#;
per square yard. Its time proven exceptional strength and flexibility makes it the preferred
metal base requested by contractors and design professionals.
Diamond mesh metal lath is available with or without a Grade-D asphalt paper-backing
breather sheet.
Galvanized Expanded Steel Plaster/Stucco Base
A self-furring expanded dimpled metal lath ideal for interior and exterior use over
sheathing, masonry and other solid surfaces as required per ASTM C. The dimple
self-furring plaster base is manufactured with evenly spaced indentations that hold the
metal lath ¼&#; away from the surface to be plastered. Self-furring metal lath is available
with or without a Grade-D asphalt paper-backing, breather sheet.sphalt paper-backing
breather sheet.
Galvanized Expanded Steel Plaster/Stucco Base
A self-furring expanded V-grooved metal lath, ideal for interior and exterior use over
sheathing, masonry and other solid surfaces as required per ASTM C.
The V-grooved self-furring plaster base is manufactured with evenly spaced indentations,
6&#; apart which run the length of the lath sheet holding the metal lath a consistent ¼&#;
away from the surface to be plastered. Self-furring metal lath is available with or without
a Grade-D asphalt paper-backing, breather sheet.
Expanded Mesh vs. Perforated Metal: Which Should You ...
A Galvanized Expanded Steel Plaster/Stucco Base
A High-Rib Metal Lath with a herringbone mesh pattern and seven deep longitudinal
solid steel ribs providing superior strength and exceptional rigidity. The heavy ribs
enable use on ceiling or wall spans at 24&#; compliant to Table 3 of ASTM C.
This excellent product is also used on 2&#; stud-less partitions and as reinforcement for
concrete floor and roof slabs.
Common Uses for Brass
An Inside Look at the Bolt Manufacturing Process
Galvanized Expanded Steel Plaster/Stucco Base
A herringbone mesh pattern with seven deep longitudinal solid steel ribs with 3-3/16&#;
wide strips of plain 50lb kraft paper spot attached with glue between ribs. Spray Rib
Lath provides the superior strength and exceptional rigidity of regular 3.4 high rib lath
while the addition of the strips of kraft paper limits the loss of plaster when used over
open framing or when machine applied. Spray Rib lath is not a replacement for Grade-D
breather sheet moisture retardant paper. (Available West Coast Only)
Reinforcement for inner corners
Striplath is a flat expanded metal strip used as plaster reinforcement over joints of
non-metallic lathing bases and where dissimilar bases join. It&#;s commonly attached
diagonally at the corners of doors, windows or areas prone to cracks. It may also be
used to span pipe chases or reinforce other stress points such as the corners of
openings in the stucco membrane within the lath system.
Reinforcement for inner corners
Cornerite&#; reinforcing angle is used to reinforce all inside or inner plaster corners
to reduce corner cracking. Cornerite&#; reinforcing angle is formed from finished edge
strip lath and bent lengthwise to a 100° angle ensuring a snug fit into 90° corners.
It&#;s commonly used when walls meet walls or ceilings, over inner angles of masonry
construction and in the floating angle method of applying gypsum lath to wood framing
in order to reduce plaster cracking.
Cornerite&#; reinforcing angle should be tied to the base lath using 18-gauge tie wire.
It should not be attached directly to support framing, but allowed to float in the corner.
Available in 2" x 2" in 4' and 8' lengths, and 3" x 3" in 8' length only.
Welded-Wire Lath (Structa-Wire) Innovative Stucco Reinforcing Products from Structa Wire Corp
Welded Wire Stucco Reinforcing Products for 3 Coat & 1 Coat Stucco
&#; From the inside out, we make stucco beautiful.
&#; We provide engineered, tested and approved solutions for stucco walls, ceilings and
corners.
&#; Our products employ the patented use of &#;cold rolled&#; or flat wires to increase strength
and structural performance.
&#; We give design consideration to every detail to ensure worker friendliness & construction
site efficiency.
&#; Technical and engineering support provided.
STRUCTALATH II (Stucco Reinforcing)
No. 17 1- 1/2" x 1-1/2" - For residential/wood frame construction
Structalath II is a welded wire lath engineered to enhance the performance of stucco
cladding. Structalath reduces cracking and increases stucco embedment while providing
worker friendly benefits.
STRUCTALATH II 38-3/8" / STRUCTALATH II 54" / STRUCTALATH II 48" TWIN TRAC (Superior Stucco Reinforcing)
No. 17 1- 1/2" x 1-1/2" - Alternative to 2.5 diamond metal lath
Structalath Twin Trac is an innovative self furring reinforcing lath that simplifies the
attachment of lath to wood and steel studs. It is excellent for commercial construction;
Twin Trac has all the great features of regular Structalath with the addition of eight
secondary cold-rolled longitudinal wires that add strength to form a 'track' for convenient
attachment. Twin Trac can be substituted wherever 2.5 metal lath has been specified.
Also available in Stainless Steel.
TWIN TRAC 38-3/8" MEGA LATH (Heavy Duty Reinforcing)
No. 17 3/4" x 1-1/2" - Alternative to 3.4 diamond metal lath
Mega lath is self furring welded wire providing heavy-duty reinforcing for both stucco and
stone installation. Mega Lath is an engineered product that provides easy attachment for
both wood and steel construction. Specifically designed for stucco applications that require extra reinforcing, Mega Lath can be used as alternative to 3.4 lb/yd2 diamond mesh metal lath specified in ASTM C 847 and at 1.95 lb/yd2 Mega Lath can be installed 24"o.c. over open framing. Mega Lath is recommended wherever 2.5 or 3.4 metal sheet lath is specified.
MEGA LATH 30" V TRUSS (Walls & Ceiling Reinforcing)
No. 17 3/4" x 1-1/2" - Alternative to 3.4 metal rib lath
V Truss for Walls & Ceilings or Structa Rib Lath was designed to improve the performance
of stucco on overhead surfaces. V Truss for Walls & Ceilings is a self furring welded wire
lath for use as an alternative to 3.4 lb rib metal lath. This product is also approved for use
on vertical surfaces and as a reinforcing component for rainscreen wall systems.
V TRUSS WALLS & CEILING 98" x 28" sheet
V TRUSS CORNER (Corner Reinforcing)
Straight & Bullnose
Structa V Truss, in addition to providing corner reinforcement, provides strength, ease
of installation and increased embedment. V Truss is the result or our continued
commitment to providing the best lathing products possible.
V TRUSS CORNER 10 ft, 9 ft, 8 ft lengths
Florida
USA &#; : 305-556-
Fax: 305-556-
Metal lath provides a lightweight and easily attachable base for plaster application.
Made from expanded steel, the lath generally is applied flat across the stud plane and
attached with staples, nails, or wafer head lath screws. The openings in the lath enable
plaster to key around the metal to assure a secure bond and a flat, smooth surface
plane upon completion of the plaster application. Metal lath comes in a variety of
configurations, including self-furring (dimpled and continuous groove for use over solid
substrates ASTM C) and paper-backed, to meet specific job requirements and
plaster/stucco preferences. ClarkDietrich products meet or exceed the requirements
of ASTM C847.
Diamond Mesh Lath
A Galvanized Expanded Steel Plaster/Stucco Base
A superior multi-purpose expanded steel base widely used for interior and exterior
plaster and stucco reinforcement. The flat surface is easily cut and formed for use with
flat or contoured surfaces. It is an excellent base for stone, spray on structural
fireproofing, ornamental work, and under ceramic tile. Expanded metal lath is formed
from sheet steel that has been slit and expanded to form thousands of plaster &#;keys&#;
per square yard. Its time proven exceptional strength and flexibility makes it the preferred
metal base requested by contractors and design professionals.
Diamond mesh metal lath is available with or without a Grade-D asphalt paper-backing
breather sheet.
Self-Furring Dimple Lath
Galvanized Expanded Steel Plaster/Stucco Base
A self-furring expanded dimpled metal lath ideal for interior and exterior use over
sheathing, masonry and other solid surfaces as required per ASTM C. The dimple
self-furring plaster base is manufactured with evenly spaced indentations that hold the
metal lath ¼&#; away from the surface to be plastered. Self-furring metal lath is available
with or without a Grade-D asphalt paper-backing, breather sheet.sphalt paper-backing
breather sheet.
Self-Furring V-Groove Lath
Galvanized Expanded Steel Plaster/Stucco Base
A self-furring expanded V-grooved metal lath, ideal for interior and exterior use over
sheathing, masonry and other solid surfaces as required per ASTM C.
The V-grooved self-furring plaster base is manufactured with evenly spaced indentations,
6&#; apart which run the length of the lath sheet holding the metal lath a consistent ¼&#;
away from the surface to be plastered. Self-furring metal lath is available with or without
a Grade-D asphalt paper-backing, breather sheet.
3/8" Rib Lath
Goto Wusheng Hardware to know more.
Featured content:Expanded Mesh vs. Perforated Metal: Which Should You ...
A Galvanized Expanded Steel Plaster/Stucco Base
A High-Rib Metal Lath with a herringbone mesh pattern and seven deep longitudinal
solid steel ribs providing superior strength and exceptional rigidity. The heavy ribs
enable use on ceiling or wall spans at 24&#; compliant to Table 3 of ASTM C.
This excellent product is also used on 2&#; stud-less partitions and as reinforcement for
concrete floor and roof slabs.
Common Uses for Brass
An Inside Look at the Bolt Manufacturing Process
Spray Rib Lath
Galvanized Expanded Steel Plaster/Stucco Base
A herringbone mesh pattern with seven deep longitudinal solid steel ribs with 3-3/16&#;
wide strips of plain 50lb kraft paper spot attached with glue between ribs. Spray Rib
Lath provides the superior strength and exceptional rigidity of regular 3.4 high rib lath
while the addition of the strips of kraft paper limits the loss of plaster when used over
open framing or when machine applied. Spray Rib lath is not a replacement for Grade-D
breather sheet moisture retardant paper. (Available West Coast Only)
Striplath
Reinforcement for inner corners
Striplath is a flat expanded metal strip used as plaster reinforcement over joints of
non-metallic lathing bases and where dissimilar bases join. It&#;s commonly attached
diagonally at the corners of doors, windows or areas prone to cracks. It may also be
used to span pipe chases or reinforce other stress points such as the corners of
openings in the stucco membrane within the lath system.
Cornerite&#;
Reinforcement for inner corners
Cornerite&#; reinforcing angle is used to reinforce all inside or inner plaster corners
to reduce corner cracking. Cornerite&#; reinforcing angle is formed from finished edge
strip lath and bent lengthwise to a 100° angle ensuring a snug fit into 90° corners.
It&#;s commonly used when walls meet walls or ceilings, over inner angles of masonry
construction and in the floating angle method of applying gypsum lath to wood framing
in order to reduce plaster cracking.
Cornerite&#; reinforcing angle should be tied to the base lath using 18-gauge tie wire.
It should not be attached directly to support framing, but allowed to float in the corner.
Available in 2" x 2" in 4' and 8' lengths, and 3" x 3" in 8' length only.
Welded-Wire Lath (Structa-Wire) Innovative Stucco Reinforcing Products from Structa Wire Corp
Welded Wire Stucco Reinforcing Products for 3 Coat & 1 Coat Stucco
&#; From the inside out, we make stucco beautiful.
&#; We provide engineered, tested and approved solutions for stucco walls, ceilings and
corners.
&#; Our products employ the patented use of &#;cold rolled&#; or flat wires to increase strength
and structural performance.
&#; We give design consideration to every detail to ensure worker friendliness & construction
site efficiency.
&#; Technical and engineering support provided.
STRUCTALATH II (Stucco Reinforcing)
No. 17 1- 1/2" x 1-1/2" - For residential/wood frame construction
Structalath II is a welded wire lath engineered to enhance the performance of stucco
cladding. Structalath reduces cracking and increases stucco embedment while providing
worker friendly benefits.
STRUCTALATH II 38-3/8" / STRUCTALATH II 54" / STRUCTALATH II 48" TWIN TRAC (Superior Stucco Reinforcing)
No. 17 1- 1/2" x 1-1/2" - Alternative to 2.5 diamond metal lath
Structalath Twin Trac is an innovative self furring reinforcing lath that simplifies the
attachment of lath to wood and steel studs. It is excellent for commercial construction;
Twin Trac has all the great features of regular Structalath with the addition of eight
secondary cold-rolled longitudinal wires that add strength to form a 'track' for convenient
attachment. Twin Trac can be substituted wherever 2.5 metal lath has been specified.
Also available in Stainless Steel.
TWIN TRAC 38-3/8" MEGA LATH (Heavy Duty Reinforcing)
No. 17 3/4" x 1-1/2" - Alternative to 3.4 diamond metal lath
Mega lath is self furring welded wire providing heavy-duty reinforcing for both stucco and
stone installation. Mega Lath is an engineered product that provides easy attachment for
both wood and steel construction. Specifically designed for stucco applications that require extra reinforcing, Mega Lath can be used as alternative to 3.4 lb/yd2 diamond mesh metal lath specified in ASTM C 847 and at 1.95 lb/yd2 Mega Lath can be installed 24"o.c. over open framing. Mega Lath is recommended wherever 2.5 or 3.4 metal sheet lath is specified.
MEGA LATH 30" V TRUSS (Walls & Ceiling Reinforcing)
No. 17 3/4" x 1-1/2" - Alternative to 3.4 metal rib lath
V Truss for Walls & Ceilings or Structa Rib Lath was designed to improve the performance
of stucco on overhead surfaces. V Truss for Walls & Ceilings is a self furring welded wire
lath for use as an alternative to 3.4 lb rib metal lath. This product is also approved for use
on vertical surfaces and as a reinforcing component for rainscreen wall systems.
V TRUSS WALLS & CEILING 98" x 28" sheet
V TRUSS CORNER (Corner Reinforcing)
Straight & Bullnose
Structa V Truss, in addition to providing corner reinforcement, provides strength, ease
of installation and increased embedment. V Truss is the result or our continued
commitment to providing the best lathing products possible.
V TRUSS CORNER 10 ft, 9 ft, 8 ft lengths
© AC1 SUPPLY, INC - All rights reserved
| Web Design & Development by Quint Advertising, Inc
Are you interested in learning more about 3.4 Spray Rib Lath? Contact us today to secure an expert consultation!
104
0
0
All Comments (0)
Previous: Expanded Mesh vs. Perforated Metal: Which Should You ...
Next: How to Choose K Lath Stucco Netting: A Comprehensive Guide
If you are interested in sending in a Guest Blogger Submission,welcome to write for us!
Comments