Do You Know The Use Of Reinforced Mesh In Bridge ...

All the intersections of the Reinforcement Steel Mesh are welded grids. The welding of the reinforcement mesh is made by a special GWC welding mesh machine. The welding process is automatically controlled by the computer. The welding seam is uniform and the welding quality is good. The mechanical properties of the reinforcement before and after welding are almost unchanged.

Click here to get more.

The application of reinforced mesh in the construction of bridges. It is mainly used in the deck pavement of city bridges and highway bridges, the reconstruction of old bridge decks, and the prevention and treatment of bridge pier cracks. The quality inspection of thousands of domestic bridges has shown that the use of reinforced mesh is significant The quality of the bridge deck pavement layer is improved, the pass rate of the protective layer thickness is more than 97%, the bridge deck flatness is improved, the bridge deck is almost free of cracks, the pavement speed is increased by more than 50% and the bridge deck pavement project is reduced by about 10% cost. Welded mesh or pre-refrigerated rolled ribbed steel bars should be used for the bridge deck pavement reinforcement. Bundled steel bars should not be used. The diameter and the spacing of the steel bars used for bridge deck pavement should be determined by the bridge structure and load level. It is 100 ~ 200mm, the diameter is preferably 600mm, the longitudinal and transverse directions of the steel mesh should be kept at equal intervals, and the thickness of the protective layer from the surface of the welding, the mesh should be below 20mm.

Concrete Reinforcement Mesh, ribbed steel mesh in the shotcrete helps to increase the shear and bending strength of the shotcrete, improve the punching resistance and bending resistance of the concrete, improve the integrity of the shotcrete and reduce the shrinkage cracks To prevent partial shedding, the reinforcement mesh is arranged in a rectangular shape, the spacing of the reinforcement mesh is 150 ~ 300mm and the specifications of the combinable reinforcement mesh are 100 ~ 200mm, 150mm × 150mm, 200mm × 200mm, 200mm × 250mm, 250mm × 300mm, 300mm × 300mm, the overlap length of the reinforced mesh sheet must be less than or equal to 50d, the thickness of the sprayed concrete a protective layer of the reinforced mesh should be less than 20mm when using double-layer reinforced mesh, The spacing should be less than or equal to 60mm.

Reinforcement Steel Mesh

According to the technical regulations, according to the technical regulations, the welded mesh should be made of Crb 550 cold-rolled ribbed steel bars, or Crb 510 cold drawn surface steel bars. A welded wire mesh is best welded with the same type of steel bar. According to the shape and specification, it is divided into two types: stereotypes and customized. The spacing and diameter of the reinforcing steel in the two directions of the shaped welded mesh can be different, but the reinforcing steel in the same direction should have the same diameter, interval and length. determine.

The diameter of the welded steel bar is 4-14mm, of which 0.5mm diameter can be used. Considering the transportation conditions, the length of the welded wire should not exceed 12m and the width should not exceed 3.4m. 150, 200mm, the rebar spacing in the opposite direction is generally 100, 150, 200, 300mm, up to 400mm. When the vertical and horizontal welded steel bars are a single steel bar, the nominal diameter of the thin steel bar is more than 0.6 times the nominal diameter of the thick steel bar, dmin&#;0.6damx. The sheer force (unit n) of the welding point of the welding, the grid must be greater than or equal to 150 times the product of the nominal cross-sectional area of the thick rebar.

The advantages of reinforced mesh, significantly improve the quality of reinforced steelworks. Significantly improve the construction speed, improve the crack resistance of concrete. Comprehensive economic benefits. If necessary, you can contact our crack resistance Crack Resistant Reinforcement Mesh Supplier.

The birth of steel mesh has greatly improved the quality of steel engineering, increased the construction speed, strengthened the crack resistance of concrete, and has better comprehensive economic benefits.

The advantages of steel mesh

If you want to learn more, please visit our website Xingtai Steel.

1. Engineering quality: Welded steel wire mesh is produced by a fully automatic intelligent production line under strict control of the factory. The grid size, steel bar specifications and quality are strictly controlled. This manufacturing method avoids the omission of the net. In addition, the products produced are very strong and can compensate for manual errors and cut corners. Reinforcing steel mesh also has greater rigidity, good elasticity, uniform and precise spacing and higher welding point strength, which greatly improves the quality of the product.

2. Improve earthquake resistance and crack resistance: The longitudinal and transverse steel bars of the welded steel mesh form a mesh structure, which has good adhesion and anchorage to the concrete, and the load is evenly distributed, which greatly improves the seismic and crack resistance. According to actual tests, compared with manual production, welded steel mesh on roads can reduce cracks by more than 75%.

3. Speed up the construction progress: The use of steel mesh can make the project construction faster. As long as the operator lays the welded steel mesh as required, the concrete can be poured without cutting on-site, placing and tying the steel one by one. It can save 50%-70% of working time, greatly speed up the construction progress and shorten the construction period.

Welded Steel Bar Mesh

the use of steel mesh

Reinforcing steel mesh can be used in bridge construction, that is, bridge steel mesh. It seems to replace manual tensioning steel bars. It is a new, energy-efficient reinforced concrete structure. Bridge steel mesh is a kind of low-carbon wire. After cold rolling and straightening, it has been cooled down. Special equipment is used to arrange vertical and horizontal directions at a certain interval. All intersections are welded together by resistance spot welding to form a steel mesh .

According to the different types of steel bars, the bridge steel mesh can be divided into hot rolled steel welded mesh, cold drawn smooth steel welded mesh and cold rolled ribbed steel welded mesh. Bridge steel mesh is a mesh piece in which longitudinal steel bars and transverse steel bars are arranged at a certain interval and at right angles to each other, and all intersections are welded together. It plays an inestimable role in bridge construction.

According to the quality acceptance of thousands of domestic bridge application projects, the use of steel mesh has significantly improved the quality of bridge deck paving. The pass rate of the thickness of the protective layer is over 97%, and the flatness is high. Improve the bridge deck with almost no cracks, increase the speed of paving by more than 50%, and reduce the cost of bridge paving by about 10%. Mainly used for pavement of municipal bridges, highway bridges, renovation of old bridge decks, crack prevention of bridge piers, etc. It is worth mentioning that the welding procedure of the bridge steel mesh is controlled by the computer to ensure the welding quality and the stability of the steel, and the grid spacing will not lose the strength and cross-sectional area of the original steel reinforcement, which can save 30%-40% of the steel. , Shorten the construction period by 80%, save labor by 60%, greatly reduce the cost, and bring huge economic and social benefits.

For more Welded Reinforcing Mesh for Bridge Decksinformation, please contact us. We will provide professional answers.